Our NEW biobased coatings are up for the job.

We sanded the existing concrete floor with a diamond sander an filled the expansion joints with a resin that dries within half an hour. The first layer is a biobased epoxy primer and is finished with a biobased epoxy top coat.

For the moment the floor at Lisman Forklifts is a trial. Based upon our previous tests we’re confident they’ll like it. This product will be available in The Netherlands

PUROC supplies Van den Broek with a special two component solution to make strong and fast repairs. QR109 produces an extremely strong connection in a mix of grit and sand. The material is easily applied and is ready for use within half an hour. It even comes in any RAL colour of your choice.

For Van den Broek this new method is a lot easier – and environment friendlier – than the traditional way with hot bitumen.

It is not possible to turn off the freezers to take time for the concrete repair. This is not necessary with PUROC.

We mixed our product PUROC QF PUR with an extra amount of catalyst to ensure fast curing in the low temperatures. We carried out the repair on Saturday, and the driveway was put back into use on Monday.

Our partner was Betocor from Hooglede, Belgium

A substantial piece of asphalt, several centimeters deep, was missing in their parking lot. At a point where heavy trucks make a turn. After cleaning we applied a mixture of aluminium silicate grit and fast curing binder.

With an outside temperature of 5C the parking lot was open for traffic again within just two hours.

The cora ‘hypermarket’ in Châtelineau (Charleroi) in Belgium caters to thousands of customers every week. The butcher’s shop takes a central place and is supplied by a large meat processing and packing area ‘behind the curtains’. In this area, the floor coating needed repairs.

The traditional way would be to seal of the area and apply a PMMA-based coating by workers dressed in airtight suits. Afterwards the area would have to be thoroughly ventilated. And you would still expect the smell of PMMA’s to linger. Impossible.

Our partners in Belgium repaired the floors in the cooling cells with a primer topped with QF EPT at a temperature of 10° Celsius up to a thickness of 2 millimetres. The repairs were done and the floor was accessible within three hours.

Aramis water treatment from Belgium puts its equipment in 40ft containers. The containers are carefully kept water- and airtight.

PUROC’s QF PUR coating on the wooden floors of these containers protects from rot and protects the equipment from dust seeping in.

First we filled holes for screws and seams between the boards with a layer of QF PUR mixed with ‘stellmittel’. This provides a smooth surface. Then we applied a full layer of QF PUR and finally a thin layer mixed with a tiny amount of glass pearl for a non-skid effect. Three layers within one day.

Our partner wanted to show and test the properties of PUROC coatings at the facilities of Vroegop Ruhe & Co. Vroegop Ruhe & Co operates cold storage facilities all around The Netherlands. Their clients entrust them with keeping their perishables at the right temperature, which is -33° Celsius, rain or shine. The cold storage facilities are an important part of a logistical chain. Which means heavy use by all kinds of transporting and lifting gear. Repairs of floor damage is frequently needed.

Our partner decided to try a mix of PUROC screed mixed with 50% sand for deep cracks (from heavy use ánd freezing) in the concrete floor. With an addition of 2% of catalyst the mixture was applied at -33° Celsius and left to dry and harden for a couple of hours.

After one more day our client re-entered the cold storage, well dressed in their winter clothes and mittens and carrying hammer and chisel . . .

Disassembly is a dirty, greasy job which needs a floor that can take a beating. Oil, hydraulic fluids, coolant and plain dirt attack the floor. Barloworld chose a combination of PUROC products for the different areas in their hall.

The disassembly area is treated with a combination of QF EPT mix with sand after thorough pre-treatment of cracks and tension areas of the concrete. For the repair and assembly area we advised the application of a smooth surface of QF EPT.

PUROC was supplied in two colours: a plain gray for the working areas and an industrial turquoise for transport lanes and walk ways.

We’ll probably hear from him again in 2035 after which time he may notice the first signs of wear . . .

On a refurbishing project in Neuss, our partner Thomas Welter (Malermeister) was asked how to repair and embellish the balconies of twelve apartments. The balconies wore a layer of old coating of indefinite age and deplorable condition.

Thomas Welter chose to treat these with a combination of three layers of PUROC products. First a layer of UP Fast as a primer and then two layers of QF PUR with catalyst sand and finished with a coloured flake.

After careful sanding and cleaning the balconies were ready and accessible within six hours . . . the occupants were able to enjoy their new balconies immediately upon coming home.